Email This Post Email This Post

Blog #003 – Your THERMOGRAPHY COMFORT LEVEL – Sorry! Mistaken identify.

What can be mistaken for interior moisture issues using thermography?  When moisture evaporates from a surface it leaves the surface cooler than the adjacent dry area.  If you are using the red/blue palette (which all of the Fluke infrared cameras have) it will appear blue (depending on the setting of the span bar).  If you are using the gray scale palette it will appear darker.  What else can appear the same on the interior of the house?  Missing insulation on a cold day will appear very similar to evaporative cooling.  Cold air blowing on a wall from the AC unit will appear very similar to evaporative cooling.  Corners at 90 degree angles (walls, floors, ceilings) often appear cooler due to the lack of air movement.  Remember, IR cameras are not moisture meters.  Our cameras use focal plane array detectors to “detect” thermal differences.  When you see a thermal difference you are looking at an “area of investigation”, period – no more, no less.

missing insulation

Missing insulation as seen by infrared camera

Moisture in ceiling as seen with IR camera

Moisture in ceiling as seen with IR camera




Missing insulation as seen with IR camera

Missing insulation as seen with IR camera


Moisture signature as seen with infrared camera

Moisture signature as seen with infrared camera




See what I mean?  That’s why you’ll want to say:  That’s an “area of investigation” – no more, no less.  After you investigate the anomaly you can identify it based on your investigation rather than on the thermal difference.   (All of the above images were taken with Fluke infrared cameras.)

How’s your comfort level in thermography?
(The above comments represent my opinion).

Rod Hoff / Restoration Consultants Inc
Thermography Instructor / IR camera sales
3284 Ramos Circle, Sacramento CA 95827
toll free 888-617-3266 ext 301
fax 916-736-1134
rhoff@restcon.com

Provider of Fluke TiS, TiR, TiR1, Ti, Ti25, TiR27, Ti27, TiR29, Ti29, TiR32, Ti32, TiR3, and TiR4 infrared cameras.

See DEMO www.moistureview.com/demo.html

Be Sociable, Share!

About infrarod

Rod Hoff is a Thermographer and instructor with Restoration Consultants, Inc. He teaches a two-day IR class in moisture and building envelope investigations. A graduate from Florida State University, with a degree in education, he received his formal training in Thermography from Snell Infrared and Restoration Consultants, Inc.
This entry was posted in infrared cameras and tagged , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

* Copy This Password *

* Type Or Paste Password Here *